Excluding Cut-to-Order Items*


UK Mainland Only

SALES 0121 379 8020

Mon-Fri 8am to 5pm

Shopping Cart - Subtotal: £0.00

You have no items in your shopping basket.

PERRY® Single Long Throw Lock - Black

More Views

PERRY® Single Long Throw Lock - Black

Key Lockable from One Side
Product ID: 34201

Availability: In stock

As low as: £28.15

Price as configured: £0.00

* Required Fields

Price as configured: £0.00

Generously designed, easy to fit and built to last, PERRY® Long Throw Locks offer a long-term solution to gate security.
Available Keyed Alike or Different with 50mm or 70mm barrels. Fitting instructions are included.


Premium marine grade stainless steel bolt (grade A4/316).
Higher-security 6 pin locking mechanism.
Heavy-duty elongated keep to compensate for gate sag.
Corrosion-resistant stainless steel fixings.
Solid brass escutcheon plate.
5 keys included - keyed alike or different.
Single Lock - Key Lockable from One Side Only.
Available in 50mm and 70mm barrel sizes.


Box Contents:
1 x Long Throw Lock
1 x Keep
1 x Escutcheon
All Fittings and 5 keys


This locking mechanism is made from high quality stainless steel and brass components. To ensure a long life from the moving components, regularly oil between the bolt and the backplate above the barrel.




How to Fit this Product:
Mark the centre of the barrel position on the door/gate, ensuring the position is suitable for fitting on both sides of the door/gate (minimum 50mm from the edge of the door/gate). Note: The body of the lock should be a minimum 5mm from the edge of the door/gate, ensuring the lock reaches across. The holes in the bar should be face down.

2. Drill a 26mm hole using an Auger/Flat wood drill bit.

3. Insert the lock and level up. Mark the holes for fixing the lock to the door/gate.

4. Remove the lock and drill pilot holes using a 3mm wood drill bit.

5. Replace the lock and fix to the door/gate using the screws provided. Note: Test the lock at this point. If the surface is not even the screws may need loosening or packing may be required for optimum performance.

6. Fit the escutcheon plate over the barrel on the other side of the door/gate and mark holes for fixing.

7. Remove the escutcheon. Drill pilot holes using a 2mm wood drill bit.

8. Fix the escutcheon using the screws provided.

9. Turn the lock into the 'locked' position and place the keep over the bolt, lining it up straight with the edge of the post or frame. Mark the hols for fixing the keep.

10. Remove the keep and drill pilot holes using 3mm wood drill bit.

11. Fix the keep to the frame/post using the screws provided.


Available with:

Black Handle Polished Brass Handle Polished Chrome Handle
Black Handle Brass handle chrome handle



Also Available:
PERRY® Double Long Throw Lock - Black
Spare Keys

Additional Information

Special Price N/A

Customer Reviews

Write Your Own Review